colorFabb LW PLA

  • £38.99
    Unit price per 
Tax included.

colorFabb Light weight PLA (LW-PLA) is one of the best filaments for printing RC Planes, Cosplay and other light weight items. Parts are feather light, yet retain good strength and are easy to cut, trim and sand. If part weight matters to you, then this is your filament of choice.

 Reduce the weight of printed parts up to 65% compared to regular PLA.

 Control extruded volume of material by regulating printing temperature. At around 230C LW-PLA starts foaming and can increase its volume by nearly 3 times.

 With one spool LW-PLA you can print as much as with 3 regular spools of PLA, due to the 3x lower material multiplier / flow.

 Easy to cut, trim, sand and takes paint really well.

 LW-PLA  (Natural,Black,Gray Silver & Red) hides layer lines really well.

 Material oozes on travelmoves, this is normal and can’t be reduced completely.

 Color will turn lighter when material is at maximum foamed state as opposed to non-foamed state which shows a deeper and richer color.

Advised 3D printing temperature 
Adviced 3d print speed
40 - 100 mm/s
Advised Heated bed 

(if you have one, not strictly necessary):


Cooling fan