colorFabb PA-CF low warp
Tax included.
The PA-CF Low Warp is a one of a kind polyamide formulation with the ability to print nearly warp free on non heated build platforms. Low infill prints come out perfectly flat on cold bed for higher infill prints 40/50C temperature is enough to obtain flat prints.
Diameter Tolerance: ± 0.1 mm |
Density: 1.14 g/cm3 |
Continuous service temperature: |
Advised 3D printing temperature 260C-280C |
Advised 3d print speed 30 - 40 mm/s |
Advised Heated bed ambient - 50C For heated glass plate build surface we can recommend using 3DLac for extra adhesion. |
Cooling fan 50% fan cooling is a good starting point, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion. |