Volcano PLA - 750g
Unique features
-
High heat resistance of ≥ 95° C after annealing
-
Less than 0.3% shrinkage after annealing
-
-
Roughly 8 times less shrinkage compared to competitor materials available on the market
-
Engineered to have excellent dimensional accuracy before and after annealing
-
-
Engineered for high printing speeds of > 120mm/s
-
-
Highly crystalline immediately after extruding resulting in increased stiffness and temperature resistance
-
-
Superb mechanical properties comparable to ABS
-
Excellent interlayer adhesion
-
Biodegradable
-
Matte surface finish
General printing guidelines *
Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.06mm | Flow rate: ± 95 - 110% |
Print temp: ± 230 - 265° C * | Print speed: High | Retraction: Yes ± 5mm |
Heat bed: ± 0 - 60° C * | Fan speed: 50-100% | Experience level: Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) Flow rate depends on printing speed and type of hotend used. For full metal hotends a lower flow rate is recommended and for high printing speeds a high(er) flow rate is recommended.
THIS PRODUCT IS AVAILABLE IN LARGER PACK SIZES. PLEASE GET IN TOUCH FOR MORE DETAILS.